AIMS Power 6000W Inverter Charger 48Vdc / 240Vac Input & 120Vac / 240Vac Split Phase Pure Sine Output PICOGLF60W48V240VS

6000 watt low frequency inverter with 18000 watt surge for 20 seconds -3x surge capability - Built for the purpose of running your whole house (smaller home), business office or large RV, this inverter peaks at 18000 watts for up to 20 seconds with the power to run many tools and appliances with startup surges. This top-of-the-line inverter charger is perfect for your off grid system or for use as an emergency backup supply. 

Split phase 110V / 120V / 220V / 230V / 240V ac - This 6000 watt inverter charger produces a pure sine wave, which some appliances require for use. The inverter outputs 120 VAC / 240VAC.

Automatic Transfer Switch - If the grid power is lost, this inverter is equipped with a seamless automatic transition transfer switch, becoming a true UPS (Uninterruptable Power Supply) when you need it in emergency situations and natural disasters (battery required).

Built with a 48 volt DC input - This inverter performs with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using 12 or 24 volts, which can be an attractive feature for sustainability lovers looking to live as efficiently as possible.

Multi stage smart charger 60 Amp charges GEL, Lead, AGM, Lithium - This inverter charger can utilize 240 V grid power to charge the batteries and send the power out to your application using the built-in 60 amp charger. The charge current control knob allows you to control the amount of current going into the batteries

7 battery type settings for charger

60hz or 50hz selectable dip switch - Need to use this in a different country or with 50hz electronics? This whole house inverter comes with Auto Frequency Detection software, providing you with the correct power frequency on either 50hz or 60hz and at 110/120/220/230 Vac to work almost anywhere in the world.

Battery priority selector - Though the inverter charger is designed with AC priority as default, switch SW5 on the inverter enables the users to select battery priority mode. This battery priority mode allows you to choose your battery bank over the grid so you can use the renewable power you were harvesting before going back to utility power.

Resettable circuit breakers

10msec typical transfer time

Optional LED and LCD Remote Ports - Enables you to connect an optional LED remote for on/off or an optional LCD remote panel to monitor many functions on the inverter from a distance. LED remote and LCD remote panel are sold separately. Click here to purchase the LED remote. Click here to purchase the LCD remote panel.

Built-in Auto Gen Start Feature - Using a two wire open and close relay, it will automatically start your generator when your battery voltage drops low enough to alarm. The generator can then recharge your batteries while maintaining constant power. 

Option to connect Battery temp sensor - You can connect an optional battery temp sensor to this inverter charger to monitor your battery bank and adjust the voltage and current of the charger based on the battery temperature.  This helps preserve and extend battery life. Click here to purchase the Battery temp sensor.

Marine coated and protected - It is protected from humidity, dust and dirt by virtue of its marine-coated or conformal-coated boards. 

Optional 25W power save mode

Specifications

Output Specifications:

• Continuous output power: 6000 Watt
• Surge rating: 18,000 Watt (20 seconds)
• Output waveform: pure sine/same as input (bypass mode)
• Output voltage: 100 - 110 - 120 / 220 / 230 / 240 Volt AC – split phase 120Vac & 240Vac
• Nominal efficiency: >88% (peak)
• Line mode efficiency: >95%
• Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical transfer time: 10ms (Max)
• THD: < 10% DC
• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications:

• Nominal input voltage: 48V DC
• Minimum start voltage: 44 VDC
• Low battery alarm: 42Vdc-44VDC
• Low battery trip: 40VDC-42VDC
• High voltage alarm: 64VDC
• Low battery voltage restart: 53.2VDC
• Idle consumption: 1.67 amps DC
• Power saver mode idle consumption: <.83 amps DC

Charger Specifications:

• Output voltage: depends on battery type
• Charger rate: 60A
• Selectable charge setting based on battery type
• Adjustable charge current off-20%-100%
• Four stage smart charger

Transfer Switch Specifications:

• 75 amp @ 120 Vac and 40 AMP @ 240 Vac automatic transfer switch (bypass)
• 10 ms (max)

Dimensions:

• Unit weight: 80 lbs.
• Unit size: L x W x H: 27.88 x 8.74 x 7.10 inches

Click to view User Manual - 6000 Watt Pure Sine Inverter Charger 48Vdc / 240Vac Input & 120/240Vac Split Phase Output

Package Contents

• The PICOGLF Inverter Charger
• Red and black DC terminal covers
• AC terminal block cover with two Phillips screws 
• Two Flange nuts and 4 Phillips screws (installed on the DC terminals)
• PICOGLF Series Owner’s Manual

Warranty

1 Year Limited Warranty by the Manufacturer

Please refer below for more details on manufacturer's warranty -

All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated. 

• 1-Year for non ETL (Extract, Transform and Load) units
• 2-Years for ETL (Extract, Transform and Load) units and batteries
• 3 Years for generators
• Batteries – product specific
• Solar products – product specific
• Cables - 10 years

Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products. Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer.

The warranty does not cover the following:

• Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws
• Products evidencing excessive wear, misuse or alteration
• Products with missing or defaced labels, stickers, or other identifying information
• Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment)
• Alterations or customizations
• Items that were purchased second hand, or from an unauthorized seller
• Items outside of the covered warranty period

Warranty Return Process
It is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim.

• Contact AIMS Power™ via phone or email to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number.

Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem.

• An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number.
• Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such.

Other Items of note:

• AIMS Power™ DOES NOT cover return shipping.
• Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 90 days.
• Any requested information that is not provided in a timely manner could result in delayed processing of your return.
• When shipping the product for a return:
• Ensure the product is packed accordingly to avoid being damaged in-transit. Include original packaging. Use proper protective material to ensure package arrives without damage.
• Ensure some form of shipment tracking is used.
• It is strongly recommended to insure the shipment.
• AIMS Power™ is not liable for products that are lost or damaged in-transit.
• The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product.

For any other questions please contact us via phone or email.

Frequently Bought Together

1. LCD Remote Panel REMOTELF - $211.00 - Connects to this inverter to monitor many functions on the inverter from a distance.
2. Battery Temperature Sensor PICGLFBATS - $45 - Connects to this inverter charger to monitor your battery bank and adjust the voltage and current of the charger based on the battery temperature. This helps preserve and extend battery life.
3. LED On/Off Remote REMOTELFLED - $40